Industry Focus
Energy Infrastructure Construction
Energy infrastructure runs on civil work most people never see: the pads under transformers, the roads to compression stations, the trenching beneath substations. TerraTek builds that layer across Texas.
This hub is the directory for that work. It covers four sectors — substations, utility providers, natural gas compression, and pipelines — each with its own page describing the civil scopes involved and how we execute them inside operator requirements. TerraTek is based in San Angelo, within working range of the Permian Basin and the West Texas energy corridors, and takes energy projects across the state. If you know your sector, jump straight to its page below; if you are pricing a mixed civil package, start with the supporting services.
What Energy Sites Demand
Sites are often remote, so access and mobilization planning carry real weight. Equipment tolerances are tight, so pads and stabilized subgrade must be exactly what the drawings say. And the work happens inside operator safety and documentation regimes — where a contractor who communicates clearly and digs only where the plan says is worth keeping.
That is the frame TerraTek brings to every energy site: build exactly what the drawings call for, prove it with documentation, and keep the operator informed at every step. The sector pages below show what that looks like in practice; the supporting services show the civil scopes underneath them.
Built for Operator Requirements
Energy owners do not just buy earthwork — they buy a contractor that can work inside their rules. That means crews that follow site-specific safety orientations and access controls, digs that start only after locates and dig permissions are in hand, and civil work recorded as it is placed: grades, compaction, trench depths, and backfill documented so your inspectors and engineers can verify the work without slowing it. It also means planning around what energy sites actually contain — energized equipment, live lines, active facilities — where the sequence on the plan is a safety document, not a suggestion.
None of that changes the basics. The same earthwork, concrete, and utility disciplines that build commercial sites build energy sites — the difference is the tolerances, the paperwork, and the environment they are executed in. If your project carries requirements beyond the drawings, send them with the bid package; we would rather price to your rules than surprise you after award.
Sectors
Four sector pages, each covering what that facility type demands from its civil contractor and which scopes we deliver there.
How to Use This Page
Choose the sector page that matches your facility. Greenfield substation pads, expansions, and switchyard civil work belong under substations, where finished grade and compaction tolerances drive everything else. Utility providers covers ongoing civil support for electric, water, and gas utilities — the site development behind their facilities and system upgrades. Compressor station pads, access roads, and containment earthwork sit under natural gas compression, while right-of-way clearing, trench support, erosion control, and facility sites along a route are covered under pipelines.
Behind every sector are the same civil fundamentals listed under supporting services — earthwork, excavation, concrete, drainage, and underground utilities — applied to energy-grade tolerances and documentation. When TerraTek carries the full civil package, the sequence runs as turnkey site development: clearing through concrete under one contract, so access, pads, trenching, and drainage land in the right order instead of being coordinated across separate subcontractors. If your project spans sectors — a compression site with pipeline tie-ins, or a substation inside a larger campus — pick the nearest page, or send the drawings through the contact page and we will map our scopes to your package.
Supporting Services
Each chip opens the service page for that scope — what it includes, how it is executed, and how it is priced into an energy package.
Energy Infrastructure FAQs
How do the civil scopes combine on an energy site?
In a fixed order: access and clearing first, then earthwork and stabilization, trenching and buried utilities while the ground is open, then pads, roads, and concrete. On energy projects those handoffs sit inside outage windows and equipment delivery dates, which is why many owners buy the sequence as turnkey site development — one contract, one schedule, one point of responsibility.
Who does TerraTek work for on energy projects?
Utilities, energy operators, EPC contractors, and the general contractors and developers delivering energy facilities. We work as the civil scope inside your project's safety, access, and documentation requirements — and we are a commercial and energy contractor only, with no residential work. The industries page shows where energy fits among the markets we serve.
Where does TerraTek take energy work?
We are based in San Angelo, within working range of the Permian Basin — Midland, Odessa, Big Spring, and Sweetwater — and we mobilize for energy projects across Texas. Remote sites are normal in this market; access and mobilization are part of how we plan and price the work rather than a surcharge discovered later.
How do we bid TerraTek on an energy package?
Send the facility type, location, drawings, and schedule through the contact page. We will review the civil package, confirm which scopes we would self-perform, and respond with pricing and any questions on the drawings — whether you are buying a single scope or the full civil sequence for the site.
Civil Support for Your Energy Project
Tell us the facility type, location, and scope. We will respond with how TerraTek can deliver the civil package inside your project's requirements.